JBL EasyTest 6in1 que thử Clo, axit (pH), độ cứng nước (GH), nitrit (NO2), nitrat (NO3) và độ cứng cacbonat (KH)
- Model: JBL EasyTest 6in1
- Hãng sản xuất: JBL
- Hộp: 50 que
Tính năng:
Que thử JBL EasyTest 6in1 giúp bạn kiểm tra 6 giá trị quan trọng của nước chỉ trong 1 phút: kiểm tra nhanh cho hồ cá, ao, nước giếng và nước máy.
Dễ sử dụng: Di chuyển băng thử trong nước trong 2-3 giây. Lấy mảnh thí nghiệm ra khỏi nước. Rớt nước theo chiều ngang. Sau 1 phút: so sánh dải thử với bảng màu trên vỏ hộp.
Xác định các giá trị sau: Clo, axit (pH), độ cứng tổng thể (GH), nitrit (NO2), nitrat (NO3) và độ cứng cacbonat (KH) của nước.
Thử nghiệm nhanh để phác thảo điều kiện kiểm tra nước - định hướng trong 1 phút.
Hướng dẫn sử dụng:
Nhúng que thử vào nước hồ cá và di chuyển trong 2-3 giây. Lấy que thử ra khỏi nước (vẫy ráo nước) và giữ ngang để cho nước rút hết. So sánh các giá trị của que thử với thang màu trên bao bì sau 60 giây.
Bảo quản que thử ở nơi khô ráo và thoáng mát.
JBL EasyTest 6in1
Test strips for quick aquarium water testing
Test strips for testing 6 important water values in 1 minute: quick test for aquarium, pond, well and tap water
Easy To use: Move the test strip in water for 2-3 seconds. Take test strip out of water. Drain off the water horizontally. After 1 minute: compare test strip with colour scale on the package.
Determination of following values; chlorine, acidity (pH), general hardness (GH), nitrite (NO2), nitrate (NO3) and carbonate hardness (KH) of the water
Quick test to outline the water conditions – orientation test in 1 minute
Package contents: test strips EasyTest 6 in 1 with colour scale. Contents: 50 test strips.
Healthy aquariums with conditions close to nature
The right water values depend on the starting water, the fish stock and the existing plants. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature regular checks and adaptions of the water values are important. The JBL test strips serve here as an orientation test.
The following parameters can be determined in a quick test:
Disinfectants in the tap water: chlorine test
Acidity of the water: pH test from 6.4 up to 9.0
Stability of the water: KH test from 0 up to 20 °dKH
General hardness of water: GH test from <1 up to >21 °dKH
Toxic nitrogen compounds: NO2 from 0 up to 10 mg/l
Cause of algae: NO3 from 0 up to 250 mg/l
Easy to use
Dip the test strip into the aquarium water and move it for 2-3 seconds. Take test strip out of the water and hold it horizontally to allow the water to drain off. Compare the values of the test strip with the colour scale on the package after 60 seconds.
Store the test strips in a cool and dry place. Only remove the number of strips which are immediately required.
You can analyse your measured water values in the JBL Online Laboratory free of charge and receive recommendations.